technical data sheet adaptor sma plug C 7/16 plug 32s160-s00n5 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/12.04/3.0 all dimensions are in mm; tolerances according to i so 2768 m-h interface according to sma side: iec 60169-15; en 122110; mil -std-348 7/16 side: iec 60169-4, vg 95250, cecc 22190, din 47223 documents n/a material and plating connector parts material plating center contact brass aurodur, gold plated outer contact brass flash white bronze over silver( e.g. optargen?) dielectric ptfe gasket silicone
technical data sheet adaptor sma plug C 7/16 plug 32s160-s00n5 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/12.04/3.0 f(ghz) electrical data impedance 50 w frequency dc to 8.3 ghz return loss 3 34 db, dc to 2.5 ghz 3 21 db, 2.5 to 8.3 ghz insertion loss 0.03 x db insulation resistance 3 5 x10 3 m w center contact resistance 3 m w , sma side 0.4 m w , 7/16 side outer contact resistance 2 m w , sma side 1.5 m w , 7/16 side test voltage 1000 v rms working voltage 480 v rms power handling (at 20 c, sea level, vswr 1.0) 200 w @ 2 ghz rf-leakage 3 100 db up to 1 ghz intermodulation (3 rd order) -120 dbm @ 2 x 20 w, 1800 mhz mechanical data sma side 7/16 side mating cycles min. 100 min. 500 coupling nut retention n/a 3 1000 n center contact captivation: axial 3 200 n 3 200 n coupling test torque max. 0.6 nm max. 35 nm recommended torque 0.5 nm 25 to 30 nm environmental data temperature range -65c to +165c thermal shock mil-std-202, meth. 107, cond. b corrosion mil-std-202, meth. 101, cond. b vibration mil-std-202, meth. 204, cond. d shock mil-std-202, meth. 213, cond. i moisture resistance mil-std-202, meth. 106 rohs compliant tooling n/a suitable cables n/a weight weight 102.7 g/pce draft date approved date rev. engineering change n umber name date m. schmid 08/03/05 j_krautenbacher 21.07.16 e00 15 -1629 i_wallner 21.07.16 while the information has been carefully compiled t o the best of our knowledge, nothing is intended as representation or warr anty on our part and no statement herein shall be construed as recommendati on to infringe existing patents. in the effort to i mprove our products, we reserve the right to make changes judg ed to be necessary.
|
